Hardware Connection - Hootoo HT-ND001 Online Manual

DHCP, PPPoE, or Static IP Internet Connection Type:
1. Ethernet Cable from the incoming Internet side
2. ISP Information: Your Internet service provider (ISP)
3. If your ISP uses a PPPoE Internet connection, you will
ISP
Information
WISP Internet Access:
1. Remote AP's SSID, MAC address, security mode,
2. Internet connection information provided by
3. Ethernet Cable (included in the package). You will
2.2

Hardware Connection

Please follow the following steps to set up the router:
1. Use an Ethernet cable and connect the router's WAN port to the internet.
2. Use an Ethernet cable and connect your computer's Ethernet port
with the router's LAN port.
3. Connect the router's power adapter.
Note:
Before connecting, please make sure that your internet is working
(provided by your Internet service provider - ISP)
should have provided you with all of the information
needed to connect to the Internet. If you cannot
locate this information, please contact your ISP.
need the ISP login name and password:
If you use a DHCP Internet connection, no

information is needed
If your ISP gives you a fixed or static IP address for

Internet connection, you will need to gather the
following information:
1) IP Address
2) Subnet Mask
3) Gateway
4) DNS Server
5) Alternate DNS Server (Optional)
cipher type, and security key
the remote AP
need it to connect your PC to the device
9
normally.