Wan Settings - Hootoo HT-ND001 Online Manual

Note：
Default IP address and subnet mask are, respectively, 10.10.10.252
1.
and 255.255.255.0.
Make sure to keep track of any changes you apply to this page. If
2.
you change the Router LAN IP address, it is necessary to connect to
the new IP address and log in again. Also, you have to set the
default gateway addresses of all LAN PCs to this new IP address.
The router LAN IP address and WAN IP address cannot be on the same
3.
IP segment. If not, the router will not be able to access the Internet.
4.3.2

WAN Settings

Here you can configure your Internet connection settings. First, select
internet connection type:
A. Select PPPoE if your ISP uses a PPPoE connection and gives you a
PPPoE user name and a PPPoE password.
B.
Select Static IP if your ISP provides you with fixed or static IP address
settings (special deployment by ISP).
C.
Select Dynamic IP if you can access Internet simply by directly
connecting your computer to an Internet-enabled ADSL/Cable
modem without configuring any settings.
Different connection types will have different a different configuration:
PPPOE
25