System Log; Faqs - Hootoo HT-ND001 Online Manual

4.11.8

System Log

The section is to view the system log. Click the "Refresh" button to
update the log. Click the "Clear" button to clear all information. The log
will clear automatically once reached 150 records.

5 FAQs

1. Q: I cannot access the device management interface. What should I do?
 Make sure the System LED on the device front panel is on.
 Make sure all cables are correctly connected and the
corresponding LAN LED on the device is on.
 Verify that your PC's TCP/IP settings are configured correctly. If you
select the "Use the following IP address" option, set your PC's IP address
to any IP address between 10.10.10.2 ~ 10.10.10.254. You can also
select the "Obtain an IP address automatically" option.
 Delete your browser cache and cookies or try using a different
browser. Make sure you enter 10.10.10.252 in the address bar.
 Press the WPS/RST button for about 10 seconds to restore your device
to factory default settings. Then log into your device again.
2. Q: I changed the login password and unfortunately forgot it. What
should I do?
Press the WPS/RST button for over 10 seconds to restore your device to
factory default settings.
64