Url Filter - Hootoo HT-ND001 Online Manual

7） Type: Protocol type, including TCP, UDP, and Both. In normal cases,
TCP is selected.
8） Time: Set the timeframe of the access restriction as needed.
9） Day: Tick to select a specific day, every day, or none
(Options: Everyday, SUN, MON, TUE, WED, THU, FRI, SAT).
6．When above settings are configured, restart the DUT. Follow Step 3 to
synchronize the System time with the Customized time after the restart.
4.8.2

URL Filter

This section is to set URL filtering access. Check the checkbox to enable
this function. Select one policy from the drop-down menu and enter a
policy name in the field.
You can set the access restriction parameters (e.g. the fixed IP range,
times, and days). You can set the URL filter through the steps below.
1. Power on the router, access the gateway through 10.10.10.252
(password: admin) to log onto the router's web page.
2. On the menu, select the Network Settings, then WAN Settings to
access its page, connect to Internet through Dynamic IP (based on
the actual settings). Click Save.
48