Usb Settings; Device Sharing - Hootoo HT-ND001 Online Manual

4.5 USB Settings

4.5.1 Device Sharing

Follow the steps below to connect a USB device to the router.
1. First, please make sure your USB device is FAT 32, then connect it to
the router.
2. Power on the router, enter the IP address 10.10.10.252 to access the
router web page.
On the web menu to the left, select USB Setting to enter the USB
3.
Settings page. Click Scan. The device information will appear once
detected, see the picture below.
Delete: Remote shared USB device.
Note: To successfully share files, first you need to access the User Account
Interface, enter user name and password, and then open sharing.
If the router fails to detect the USB device, the below page will appear.
Figure 3
35