Iridium 9603 Developer's Manual page 21

Sbd transceiver
Table of Contents

Advertisement

Iridium 9603 SBD Transceiver Product Developers Guide
Revision 3.1
Table 9: DC Power Input Specifications
Supply Input Voltage Range
Supply Input Voltage Ripple
Typical Power Consumption at +5.0 VDC
Idle Current (average*)
Idle Current (peak)
Transmit Current (peak)
Transmit Current (average*)
Receive Current (peak)
Receive Current (average*)
SBD message transfer - average current*
SBD message transfer - average power*
* Note: The average power consumption will vary depending on the view of the satellite constellation from the antenna.
** Note: Includes Tx Burst droop. This is the supply voltage range of the 9603; the 9603N has an extended supply voltage range of
+5 V +/- 0.5 V
The external power supply needs to guarantee the following:
The supply voltage droop over for a 8.3ms burst of 1.5A current should not be more than 0.2 Volts
The power supply should limit the in-rush
The power source shall provide for over current protection in case of device malfunction.
The supply noise should be less than the limits in the following profile:
100 mVpp
5 mVpp
10 mVpp
5 mVpp above 5 MHz measured in 1 MHz bandwidth.
1
On the 9603N the supply droop should not be more than 0.5 volts.
2
In rush limit refers to the impedance of the modem when it is unpowered is very low. When power is supplied from an
unlimited supply the instantaneous current can exceed 4 Amps If the current exceeds this value damage can occur. This can be
limited in several ways, included using a supply that cannot provide more than 4 Amps instantaneously; or providing some
series inductance/resistance to the supply lead.
Proprietary & Confidential Information
Distribution of guide restricted to product developers only • Information contained in this guide is subject to change without notice.
Parameter
2
current to 4 Amps maximum
from 0 to 50 kHz
at 1 MHz measured in 50 kHz bandwidth
at 1 MHz measured in 1MHz bandwidth
9603 Value
9603N Value
5.0V DC +/-
5.0V DC +/-
0.2V**
0.2V**
< 40 mV pp
< 40 mV pp
9603 Value
9603N Value
45mA
34mA
195mA
156mA
1.5 A
1.3 A
190mA
145mA
195mA
156mA
45mA
39mA
190 mA
158mA
<= 1.0 W
<= 0.8 W
1
.
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9603n

Table of Contents