Safety information Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.
Interference Information This equipment generates and uses radio frequency energy which may interfere with residential radio and television reception if not properly installed and used in accordance with instructions contained in this manual. Reasonable protection against such interference is ensured, although there is no guarantee this will not occur in a given installation.
Page 5
Safety information Hearing Aid Compatibility (HAC) This telephone system meets FCC/Industry Canada standards for Hearing Aid Compatibility. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Contents Safety information Important Information For your safety Need Help? Configure your ID9370 Install battery Language Registration What’s in the box? Your ID9370 Overview of the handset Install Call Personal Settings Advanced Settings Games Troubleshooting Information Index...
- Store in a place where temperature is always between -20 and 45º C (-4 to 113º F). - Battery life may be shortened in low temperature conditions. Need Help? For more information on troubleshooting: page 25 Troubleshooting: Please refer to the following website for more information on Philips web support: Online Support www.philips.com/support...
Configure your ID9370 Install battery Your ID9370 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 150 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. Use the coin or screwdriver to unlock the battery cover.
Configure your ID9370 Language Your ID9370 can support different display languages. To change the language Press MENU Language and press Scroll to your desired language and press A validation tone is emitted and the screen returns to previous menu. Registration The procedures described below are the procedures that you will find in your ID9370 handset.
What’s in the box? The following accessories are included: Handset Power supply for 2 AAA rechargeable base station NiMH batteries Splitter User Guide Warranty card...
Overview of the handset LCD Screen Left Soft key Talk key Keypad lock key / Format key Loudspeaker key Your ID9370 Event LED (top of the handset) Microphone Up/Down Navigation keys Earpiece Right Soft Hang-up key Alphanumeric keypad Case key / Pause key / Intercom key...
Your ID9370 Handset keys Press Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. Activate mute function during a call. Switch on the backlight. > Go to redial list from stand-by mode. Select the function displayed on the handset screen directly above it.
Out of range warning The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond operation range, the antenna icon Install Philips 08-08 06:00pm MENU REDIAL is displayed.
Intercom This feature is only available when there are at least 2 registered handsets. It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option. Intercom another handset To be able to use intercommunication feature, you must have at least 2 handsets registered to your base station (see page 10 "Registration").
Page 16
Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. Press and hold caller can no longer hear you). Long press All Handsets handset you want to call and press...
Personal Settings Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, level is Medium. To set ring volume Press , scroll MENU Handset Tones to enter Scroll to your desired volume level and press A validation tone is emitted and the screen returns to previous menu. When Silence is activated, the icon...
Group Melody To benefit from this feature, you must subscribe to the Caller Line ldentification service. This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group. You can associate 1 ring melody to each group.
A validation tone is emitted and the screen returns to previous menu. Handset Name You can name the handset and display the handset name in stand-by mode. The default handset name of your handset is PHILIPS. Personal Set and press...
Edit the handset name and press A validation tone is emitted and the screen returns to previous menu. Maximum length of the handset name is 14 characters and the default handset name is PHILIPS. Language See page 10. Babysit mode You must have at least 2 handsets registered to your base station to be able to use this feature (see page 10 "Registration").
Personal Settings To deactivate Babysit mode Press , select MENU Backlight time To set Backlight time Press , scroll MENU Backlight Time and press Select 20s, and press A validation tone is emitted. Backlight is activated when there is an incoming call, new message, etc. The default backlight time is 20s.
Registration See page 10. Unregistration To unregister a handset Press MENU Unregistration and press Enter the Master PIN when prompted and press Select in the list of handsets displayed, the handset that you wish to unregister. A validation tone is emitted to indicate successful unregistration and the screen shows Unregistered.
Memory The objective of this game is to find and match different pairs of graphics in the shortest possible time using your memory. To win, you have to complete matching all 8 pairs of graphics in a 4x4 matrix. To start the game Press , scroll MENU...
Tetris You can rotate each shaped block as they fall such that they fit neatly into horizontal blocks. The more blocks you can gather within the same level, the more you will score. To start the game Press MENU press SELECT An instruction screen is displayed.
Troubleshooting Troubleshooting of the phone Please refer to the following website for more information on Philips web support: www.philips.com/support Problem The icon is not blinking when the handset is placed on the base No dialling tone Poor audio quality icon is blinking Causes •...
Page 26
Problem The handset displays “not available” • When attempting to add another handset to the base station • When using a handset Noise interference on your radio or television Caller Line Identification (CLI) service does not work No ring tone A phonebook entry cannot be stored Troubleshooting...
Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.
Philips’s participation in RBRC® makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at authorized Philips product service centers.