Removing The Back Fan Tray - Alcatel OmniSwitch 8800 Hardware User's Manual

Chassis and Power Supplies

Removing the Back Fan Tray

1
Begin by loosening the four captive screws located at the four corners of the fan tray. Use a flat-head
screwdriver if necessary.
2
After the captive screws have been loosened (i.e., disengaged from the threaded holes in the chassis),
pull the fan tray straight out and away from the switch.
OmniSwitch 8800 Hardware Users Guide December 2004
Chassis Fan Trays
page 2-33