AEG L9FEA966C User Manual page 30

30 www.aeg.com
1. Tap on the Extra Rinse bar to enter
the option submenu.
2. Scroll the bar right to add from 1, 2
or 3 additional rinses (OFF= no
additional rinse).
When you return to programme
summary screen, the shortcut
on. The dots indicate the number of
additional rinses selected.
This option increases the
programme duration.
If the Extra Rinse is set as a
default option and you
select a compatible washing
programme, the touch
screen will show
case, by setting the Extra
Rinse option , it is possible
to add just one rinse
12.10
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric creasing
and facilitates the fabric ironing.
Tap on the Plus Steam bar to activate
the option (ON status).
This option can increase the
programme duration.
A small laundry load helps to
reach better results.
When you return to programme
summary screen, the shortcut
on.
12.11
Set the Soft Plus option to optimise the
fabric softener distribution and improve
the fabric softness.
It is suggested when using the fabric
softener and especially when the drum is
full and the laundry is very soiled.
This option increases slightly
the programme duration.
. In this
.
Plus Steam
Soft Plus
Tap on the Soft Plus bar to activate the
option (ON status).
When you return to programme
summary screen, the shortcut
on.
will be
12.12
When this option is set, at the end of the
cycle the drum performs smooth
movements for about 30 minutes to
favour the garments softness.
Tap on the Anti-crease bar to activate
the option (ON status).
When you return to programme
summary screen, the shortcut
on.
12.13
With this option you can change the
steam level depending on the laundry
size.
1. Tap on the Steam Level bar to enter
the submenu.
2. Scroll the list right or left to set one
of the three levels:
• Minimum
• Medium
• Maximum
12.14
With this option it is possible to save the
two most used washing programmes.
To save your favourite programmes:
will be
1. First set the washing programme and
the desired options.
2. Tap on the Memory bar to enter the
submenu.
3. Tap on the Memory 1 or Memory 2
to save the set programme. The
status will change from Empty to In
Use .
When you return to programme list
screen, the M1 or M2 will be on next to
the programme name when you set it.
Anti-crease
Steam Level
This is available with the
Steam programme only.
Memory
will be
will be