Product Description - AEG L9FEA966C User Manual

10 www.aeg.com
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter
of the drain hose.
4. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.

4. PRODUCT DESCRIPTION

4.1 Special features
Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
respectful of fabric care.
• The interactive touch screen display
makes the setting and the use of the
appliance more immediate and
agreeable.
• The Wi-Fi connection enables you to
start and check your washing cycle
status in remote control.
• The SoftWater Technology acts as
water softener and removes harsh
minerals from the inlet water and
supplies soft water for the washing.
5. Without the plastic hose guide, to
a sink spigot - Put the drain hose in
the spigot and tighten it with a
clamp. Refer to the illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
6. Position the hose directly to a built-
in drain pipe in the room wall and
tighten it with a clamp.
Wash after wash, fabric stiffness,
shrinkage and colour fading are
prevented.
• The Oko-Mix technology has been
designed to protect the fabric fibres
thanks to different pre-mixing phases
that dissolves first the detergent and
then fabric softener in the water
before they are distributed in the
laundry. So every fibre is reached and
cared for.
• Thanks to the Weight Sensors the
appliance can detect the weight of
your load and advise on how much
detergent you need to achieve the
best results without waste.
• The ProSense technology adjusts
automatically the programme
duration to the laundry in the drum to