Installing Spring Action Belt Clip; Power Supply, Adaptor And Drop-In Tray Charger; Charging The Battery - Motorola RDM2070d User Manual

Note: RDX Series offers an Alkaline Battery
Frame accessory (P/N RLN6306A) as an
alternative battery solution. If you plan to
use this accessory, please contact Motorola
Service Support Center (1-800-501-8614
Option # 9) to ensure your radio settings are
updated to work will alkaline batteries.

Installing Spring Action Belt Clip

1. Slide the spring action belt clip rails into the belt
clip grooves on the back of the battery pack and
slide it down until the belt clip tab snaps into
place.
2.
Power Supply, Adaptor and Drop-in Tray
Charger
Belt Clip
Tab
Drop-in Tray Charger
The radio is equipped with one Drop-in Tray
Spring
Action Belt
Charger and one Power Supply with Adaptor.
Clip
For details, see "Chargers" on page 44.

Charging the Battery

RDX Series™ offers two types of chargers:
• Standard Charger and,
• Rapid Charger.
To remove, pull back the metal release tab on
the belt clip tab and push the spring action belt
clip upward to remove.
Power Supply
11
English