Advertisement
3. System Setting
The M-4132 module is built-in web server, the user can configure and operate the M-
4132 by web browser (ex: IE).
Connection Setting
The user needs to prepare a system as figure 1. The user can connect PC and a M-
4132 by Ethernet switch. M-4132s' default IPs (Default IP address is
"192.168.1.217") are the same. It can not connect with two M-4132 at the same
time before the setting is finished, else M-4132s' IPs will conflict. The connection
setting will be described below and Microsoft Windows XP Professional SP2 is
used.
a. Setting the Network of PC：Set the IP and Subnet mask of the PC. These
settings must have the same domain and different IP with the M-4132. (ex: M-
4132's default IP = 192.168.1.217, PC's IP = 192.168.1.210).
Step 1: Click "start->Settings->Network Connections".
Step 2: Double click "Local Area Connection" icon.
Step 3: Click "Properties" button.
Step 4: Select "Internet Protocol(TCP/IP)" and click "Properties" button.
Step 5: Set "Internet Protocol Properties" and then click "OK" button.
Step 1: Click "Network Connections"
M-4132 Quick Start User Guide (Version 1.10 Oct/2009)
Step 2: Click icon
PAGE: 4
Advertisement
