Advertisement
Option
Normal setting
LED Indicator
LED status indicator
Name
Status
PWR
SA1
flash
flash slowly
SA2
flash fast
SA1
flash slowly (SA1
&
& SA2 flash at the
SA2
same time)
flash (SA1 & SA2
alternate flash)
M-4132 Quick Start User Guide (Version 1.10 Oct/2009)
State
To press the TB about 40
second after power on
The other states
on
Power supply is ok.
off
Power supply has failed.
It is receiving com port data via Ethernet.
Server: The Ethernet is initial ok and wait client to login.
Client: The Ethernet is initial ok and login completely. It has
readied to enable voice and com port data connection.
It is sending or receiving voice data via Ethernet.
AP has some errors. (Client: Please check settings about IP &
on
DNS)
It is trying to establish the connection with server/client. If it
can't connect to server/client for a long time, please check it has
available network settings and is working well on Ethernet.
Server: Receive the request to connect from the client.
Client: Request the server to connect.
Description
information from Com Port(RS-232).
Normal state; It will not change any
setting and data.
Description
PAGE: 3
Advertisement
