ICP DAS USA M-4132 Quick Start User Manual page 2

7-pin screw terminal block
Pin Name
1 T.GND
2 Trig
3 D+
4
5 PWR
6 GND
7 F.G.
DIP Switch and Trigger button
Dip switch and trigger button for initial function
Option
Recover default
setting forever
IP recover default
setting for this time
IP recover default
setting forever
Display the current IP
and version
M-4132 Quick Start User Guide (Version 1.10 Oct/2009)
GND of trigger input
Trigger input
Data+ of RS-485
D- Data- of RS-485
V+ of Power Supply (+10 to +30VDC)
GND of Power Supply
Frame Ground
State
SW2=ON
SW1=ON
To press the TB about 40
second after power on
SW2= OFF
SW1= ON
To press the TB about 40
second after power on
SW2= ON
SW1= OFF
To press the TB about 40
second after power on
SW2=OFF
SW1=OFF
Description
All system settings will be cleared and
recover default settings.
(Warning: it will not restore settings
after clear)
After power on, it will set IP to default
setting (192.168.1.217) for this time,
but it will restore original IP at next
time.
After power on, it will set IP to default
setting (192.168.1.217) and save to
flash.
After power on, it will display the
message about current IP and version
Description
PAGE: 2