Advertisement
The KN104 operates using the supplied AC Adapter (Operate at 120V ~ 60Hz) or 8 X 'C' size
(UM-2) batteries (not included).
AC ADAPTER OPERATION
Note: Only use the supplied adapter.
1. Plug the AC adapter into normal AC power outlet socket.
2. Insert the DC plug of the AC adapter cord into the DC IN JACK (#20) at the back of the unit.
3.
When the unit is operated using AC adapter, the battery source will automatically be
disconnected.
WARNING: Before connecting to the power supply, ensure that the supply corresponds to the
information on the rating label at the back of the apparatus.
BATTERY OPERATION
Notes: Disconnect AC adapter before installing batteries.
For best performance and longer operating time, we recommend the use of alkaline batteries.
1. Remove the BATTERY DOOR (#21) on the back of the unit.
2. Follow the polarity diagram shown in the BATTERY COMPARTMENT to insert 8 X 'C' size
(UM-2) batteries and close the door.
BATTERY WARNINGS
1. Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
2. Use only the size and type of batteries specified.
3. Do not mix old and new batteries.
4. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
5. For better performance and longer operating time, we recommend the use of alkaline-type
batteries.
6. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking
batteries can cause damage to the unit and may void the warranty.
7. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer's directions).
8. Do not dispose of batteries in fire, batteries may leak or explode.
POWER SOURCE
E-6
Advertisement
