Advertisement
3. Press PLAY/PAUSE BUTTON (#8) to play the disc. If a CD+G track is being played, the
title of the track will appear on the TV screen.
4. Select your favorite song using the FORWARD SKIP BUTTON
(#15).
5. Tap PLAY/PAUSE BUTTON
6. Turn ON your microphone and starting singing. Adjust the MASTER VOLUME CONTROL (#19),
MIC VOLUME CONTROL (#5) and TV VOLUME if necessary.
SINGING ALONG FROM AUX INPUT SOURCES
This karaoke unit features an AUX-IN JACK (#26) for connecting your iPod, MP3 player or other
digital music player.
1. Connect the headphone jack of your external device to the AUX IN JACK (#26) located on the
right side of this unit.
2. Turn on the unit and it will enter the AUX function mode once an external device is plugged into
the AUX IN JACK (#26).
3. Connect the line out or headphone jack of your external audio device (e.g. a CD player, MP3
player, iPhone, iPod, etc.) to the unit with the audio cable.
4. Select your favorite song on your external audio device to play. You may need to adjust the
output volume of your external audio device if the headphone jack is used for making the
connection.
5. Turn on your microphone and start singing. Adjust the MASTER VOLUME CONTROL (#19)
and/or MIC VOLUME CONTROL (#5) if necessary
6. You may also use the BALANCE CONTROL (#6) and ECHO CONTROL (#18) to enhance your
singing experience.
7. Turn off both devices after use.
NOTE: Once the AUX IN jack has been plugged into, the unit automatically enters the AUX
mode .Remember to disconnect the Aux In cable from the unit after use in order to listen to the CD
input again.
USING THE UNIT AS A PUBLIC ADDRESS SYSTEM
This unit can also be used as a PA (Public Address System).
Note: To prevent feedback or whistling from occurring, please be sure that the microphone is not
held too close to unit's speaker.
1. With unit stopped at CD mode, unplug any 3.5mm audio cable connected to the AUX IN JACK
(#26) previously.
2. Turn on your MICROPHONE (one included) and start your performance. Adjust the
MASTER VOLUME CONTROL (#19), MIC VOLUME CONTROL (#5) and ECHO
CONTROL (#18) if necessary.
Slide the POWER SWITCH (#24) to Light Show On position. The different LED colors will light up
on the CD DOOR. Slide the POWER SWITCH (#24) to Power On position to turn it off.
If the system does not respond or exhibits erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
microcontroller to shut down automatically. If this occurs, simply disconnect the AC Adapter and
remove the batteries. Wait for at least 3 minutes and then setup the unit again as if you were using it
for the very first time.
(#8) to start playing.
LIGHT SHOW
RESETTING THE UNIT
E-11
(#9) or BACK SKIP BUTTON
Advertisement
