Advertisement
1.
Clean your unit with a damp (never wet) cloth. Solvent or
detergent should never be used.
2.
Avoid leaving your unit in direct sunlight or in hot, humid or
dusty places.
3.
Keep your unit away from heating appliances and sources of
electrical noise such as fluorescent lamps or motors.
4.
If drop-outs or interruptions occur in the music during CD play,
or if the CD fails to play at all, its bottom surface may require
cleaning. Before playing, wipe the disc from the center outwards with a good soft cleaning cloth
PROBLEM
The unit does not respond (no
power)
Unit is ON but there is low or no
volume
CD player of Karaoke System
does not work normally or the "No"
appears on the LED DISPLAY.
No sound - If audio is going
through TV/ home stereo
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
The unit is disconnected
from the AC outlet.
The AC outlet has not
power.
The master volume control
has been turned all the
way down.
Volume control on TV
set/PA system is set to
minimum
Disc is inserted upside
down.
Disc is dirty.
Disc is scratched.
Disc is warped.
A non-standard disc is
inserted.
Lens is dirty.
Moisture has condensed
inside the CD deck.
Karaoke system needs to
be reset.
Source Selection on your
TV/home stereo is not set
properly.
Improper connection to
stereo system or PA.
E-12
REMEDY
Reconnect to the AC Adapter.
Try the unit on another outlet.
Turn the master volume control
to a higher output.
Turn up the volume of the TV/PA
system.
Insert disc correctly.
Wipe it clean with soft cloth.
Use a new disc.
Use a new disc.
Only use compatible discs
mentioned in this manual.
Clean the optical pickup with a
CD lens cleaner.
Wait about 20 to 30 minutes to let
it dry out.
Disconnect the machine from
power source for 30 seconds.
Select AV INPUT as the source
for your TV/home stereo.
Follow directions on 'Audio
Connection' section for
connecting to a home stereo
system.
Advertisement
