Advertisement
No song lyrics appear on the TV
screen
No image on TV screen
Cannot sing through the mic
Output power
Speakers
Aux In jack
Microphone Input
Microphone
Power source :
AC Adapter:
Battery:
Due to continuing improvement, the features and the design are subject to change without notice.
Karaoke Night products are designed and engineered by Marino Andriani, LLC.
Video cable is not
connected properly to the
TV.
Source selector on TV is
not set to VIDEO or A/V IN.
TV does not have video
line input.
A CD+G disc is loaded but
the CDG indicator is not lit.
TV input is not properly set.
Improper MIC volume
setting.
MIC is off.
MIC is not properly
plugged in.
SPECIFICATIONS
: 1.5 W + 1.5 W (RMS)
: 2 x 3 " 8 ohms
: 3.5 mm
: 600 ohms Impedance with 6.3 mm jack
: 1 x Dynamic Microphone
Input AC 120V~ 60Hz
Output DC 12V
1A
8 x 1.5V
"C" size (UM-2)
Connect the video cable to the
VIDEO OUT of the unit and to the
TV's Video In jack.
Use your TV Remote to select
VIDEO or A/V input.
Connect from VIDEO OUT of the
unit to a RF modulator and then
to the TV cable input.
Check the disc to be sure it is a
CD+G.
Check disc to ensure it is clean.
Set TV input to correct A/V input
that is connected to the unit.
Adjust MIC and MASTER
VOLUME CONTROLS to
appropriate levels.
Turn on MIC with the ON/OFF
switch located on the
microphone.
Insert the mic plug fully into either
MIC 1 or MIC 2 JACK of the unit
properly.
E-13
Advertisement
