Advertisement
INPUT FUNCTIONS
7. DC IN JACK (#20)
Connect the DC plug of the DC12V output AC Adapter (included) to this jack.
8. AUX IN JACK (#26)
Connect the 3.5mm stereo plug of a stereo audio cable to this jack and the other end to an
external audio player for playback.
9. MIC 1 / MIC 2 JACKS (#25)
Connect the microphone (one included) to either one of the jacks to sing
OUTPUT FUNCTIONS
10. VIDEO OUT JACK (#22)
Connect the yellow coded RCA plug of the A/V cable (included) to this jack and the other end
to the VIDEO/AV INPUT of your TV.
11. AUDIO OUT JACKS (L/R) (#23)
Connect the white coded RCA plug (L) and red coded plug (R) of the A/V cable (included) to
these jacks and the other end to the audio inputs of your TV.
KARAOKE CONTROL FUNCTIONS
12. MASTER VOLUME CONTROL (#19)
Adjust this to obtain the desired volume level from the built-in speaker.
13. BALANCE CONTROL (#6)
Adjust this to obtain the optimum music and vocal levels while playing a CD+G or file or as left
(L) and right (R) channel balance while playing ordinary stereo sound tracks of CD or MP3.
14. AVC (AUTOMATIC VOICE CONTROL) BUTTON (#17)
When AVC is On, the vocals on a multiplex recording are eliminated as soon as the singer
begins singing into the microphone. When the singer stops singing, the vocals on the
multiplex recording are automatically re-activated. This function is used primarily during
practice sessions.
15. MIC VOLUME CONTROL (#5)
Adjust this control to obtain the desired mic volume output during singing.
Volume level of both Mic 1 and Mic 2 will be adjusted at the same time.
16. ECHO CONTROL (#18)
Turn this control clockwise for a more significant echo effect to enrich your voice for a concert
hall effect.
SING WITH CD+G OR AUX IN MUSIC SOURCE
GETTING PREPARED FOR YOUR SINGING SESSION
You will need to do the following things:
- Connect your unit to a compatible TV using the included A/V cable.
- Plug in the included MICROPHONE into either the MIC 1 or MIC 2 JACK (#25).
Note: Always set the mic to OFF until you are ready to sing to avoid possible sharp feedback noises.
SINGING ALONG WITH CD+G, CD, CD-R/CD-RW
1. Set the POWER SWITCH (#24) To POWER ON or LIGHT SHOW position.
2. Load a CD/CD+G disc as follows:
a) Grip the top front edge on the CD DOOR where indicated and pull gently to open it. The LED
DISPLAY will display "OP".
b) Load a disc vertically into the compartment with the printed side facing you.
c) Gently close the CD DOOR. The unit begins to read the disc. The LED DISPLAY will display
the total number of tracks. (If no disc is loaded or the disc cannot be recognized, "No" will be
displayed in the LED DISPLAY).
d) When a CD+G disc is detected and being played, the CDG INDICATOR (#14) will light.
E-10
.
Advertisement
