Ricoh SP 4510DN User Manual page 334

7. Managing the Printer
Communication Start Request Receiver (In)
Communication Start Request Sender (Out)
Communication Start Log ID
Indicates the log ID for the communication start time.
This is a hexadecimal ID that indicates the time at which the communication started.
Communication Start/End
Indicates the times at which the communication started and ended.
Network Attack Status
Indicates the machine's status when network attacks occur.
Violation Detected
Recovered from Violation
Max. Host Capacity Reached
Recovered from Max. Host Capacity
Network Attack Type
Identifies the type of network attack as either "Password Entry Violation" or "Device Access
Violation".
Network Attack Type Details
Indicates details about the type of network attack: "Authentication Error" or "Encryption Error".
Network Attack Route
Identifies the route of the network attack as either "Attack from Control Panel" or "Attack from Other
than Control Panel".
Login User Name used for Network Attack
Identifies the login user name that the network attack was performed under.
188
Value
Value
Content
The printer received a request to start
communication.
The printer sent a request to start
communication.
Content
An attack on the network was detected.
The network recovered from an attack.
The printer became inoperable due to the
volume of incoming data reaching the
maximum host capacity.
The printer became operable again following
reduction of the volume of incoming data.