Ricoh SP 4510DN User Manual page 201

5. Select the authentication system to be used for external authentication.
[Authentication Type]
Select an available authentication system. For general usage, select [Default].
6. Enter the domain name.
[Domain Name] Enter the domain name
You cannot specify a domain name under an authentication system that does not support domain
login.
7. Obtain the URL of the server specified in "Server Name".
[Obtain URL] [Check]
If "Server Name" or the setting for enabling SSL is changed after obtaining the URL, the URL is "Not
Obtained".
8. If you have registered the group to be used for external authentication, specify the group.
[Program/Change Group]
[OK]
If you set "Authentication Type" to [Windows (Native)] or [Windows (NT Compatible)], you can
use the global group.
If you set "Authentication Type" to [Notes], you can use the Notes group. If you set "Authentication
Type" to [Basic (Integration Server)], you can use the groups created using the Authentication
Manager.
9. Specify the level for printer job authentication.
[Printer Job Authentication]
If you select [Simple (Limitation)], specify the range in which [Simple (Limitation)] is applied to
"Printer Job Authentication". You can specify the IPv4 address range to which this setting is applied,
and whether or not to apply the setting to the parallel and USB interfaces.
[Simple (Limitation)]
(Limitation)] is applied to "Printer Job Authentication"
For a description of the printer job authentication levels, see page 57 "Printer Job
Authentication".
Select the authentication system
[OK]
[* Not Programmed]
Select the printer job authentication level
[Change Limitation Range]
Integration Server Authentication
[OK]
[Group Name] Enter the group name
[OK]
Specify the range in which [Simple
[OK] [Exit] [OK]
55