Ricoh SP 4510DN User Manual page 179

authentication, or Integration Server authentication. In this case, since the User Code authentication
does not require a password, the login password is set as blank.
• When authentication switches to an external authentication method (Windows authentication,
LDAP authentication, or Integration Server authentication), authentication is not required unless the
external authentication device has the carried over user code account previously registered.
However, the user code account will remain in the Address Book of the printer despite an
authentication failure.
• From a security perspective, when User Code authentication switches to another authentication
method, we recommend that you delete accounts you do not use, or set up a login password. For
details about deleting accounts, see Web Image Monitor Help. For details about changing
passwords, see page 38 "Specifying Login User Names and Passwords".
• You cannot use more than one authentication method at the same time.
• After the main power is turned on, extended features may not appear in the user authentication
items in the User Authentication Management menu. If this happens, wait a while, and then open
the User Authentication Management menu again.
• User authentication can also be specified via Web Image Monitor. For details, see Web Image
Monitor Help.
Configuring User Authentication
33