Needle Threader - Janome HD3000 Instruction Book

q
e

Needle Threader

Lower the presser foot. Raise the needle to its highest
position.
Pull down the needle threader knob as far as it will go.
q Threader knob
Turn the knob in the direction of the arrow in the
illustration, then insert hook into the needle eye.
The hook comes out through the needle eye from be-
hind. Paying close attention to the needle point, draw
the thread around the guide and under the hook.
w Hook
e Guide
w
Turn the knob in the direction of the arrow in the illus-
tration, drawing the thread loop through the needle.
Gently let the threader goes up to pull the thread loop
up.
Pull the thread through the needle eye.
NOTE:
The needle threader can be used with a #11 to #16
needle or a blue tipped needle.
Thread size 50 to 90 should also work well.
13