Winding The Bobbin; Horizontal Spool Pin; Additional Spool Pin; Removing The Bobbin - Janome HD3000 Instruction Book

Winding the Bobbin

Horizontal Spool Pin

Lift up the spool pin. Place the spool of thread on the
spool with the
thread coming off the spool as shown.
Attach the large spool holder pressing it firmly against
the thread spool.
* The small spool holder is used with narrow or small
thread spools.

Additional Spool Pin

The additional spool pin is used to wind extra bobbins
without unthreading the machine.
To use, insert the additional spool pin in the hole.
Place the felt and the spool on the pin.

Removing the Bobbin

Gently slide the hook cover plate release button to the
right, and remove the cover plate.
Lift out the bobbin.
9