BenQ XL2540 User Manual page 54

Item
Reset All
54 Navigating the main menu
Allows the monitor settings to be set through
DDC/CI
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was
developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for
remote diagnostics.
Resets all mode, color and geometry settings to the factory
default values.
If an S Switch is connected to your monitor while performing this
operation, the game mode settings saved on S Switch will be reset
as well.
Function Range
• ON
• OFF
•
YES
•
NO