How To Install The Monitor On A New Computer - BenQ XL2540 User Manual

How to install the monitor on a new computer

This instruction details the procedure for selecting and installing the BenQ ZOWIE LCD
Monitor driver software on a new computer which has never had a monitor driver installed
before. This instruction is only suitable for a computer which has never been used before, and
for which the BenQ ZOWIE LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ ZOWIE LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions. You
should instead be following the instructions for
1. Follow the instructions in
When Windows starts, it will automatically detect the new monitor and launch the
New Hardware Wizard
Device Drivers
2. Insert the BenQ ZOWIE LCD Monitor CD-ROM into a CD drive on the computer.
3. Check
Search for a suitable driver for my device
4. Check the option for CD-ROM drives (uncheck all others) and click
5. Look to confirm that the wizard has selected the correct name of your monitor and click
.
Next
6. Click
Finish
7. Restart the computer.
To find the suitable driver files for the purchased model, refer to the following table.
Driver files
XL2536
XL2540
XL2546
XL2735
28 Getting the most from your BenQ ZOWIE monitor
How to assemble your monitor hardware on page
. Follow the prompts until it displays the option to
.
.
XL2536 / XL2536E
XL2540 / XL2540E
XL2546 / XL2546E
XL2735 / XL2735E
How to upgrade the monitor on an existing
option, and click
Suitable models
computer.
12.
Found
Install Hardware
.
Next
.
Next