Cleaning The Filters - Shark HV380ANZ Series Instructions Manual

Dust Cup
Release
2 Hold dust cup over a trash bin and press
the Empty button on the front of the dust
cup. The bottom lid will open, allowing the
debris to fall out.
3 Once dust cup is empty, close the bottom
lid and insert dust cup back into handheld
vacuum until you hear it click into place.
Clean Filter
Empty

CLEANING THE FILTERS

Access the Pre-Motor foam and felt
1
filters by lifting the latch on the top of the
handheld vacuum. Remove and rinse
the filters with water. Tap loose dirt off
filters between washes as needed. Once
completely dry, insert the felt filter first,
then place the foam filter on top of it.
Access the Post-Motor filter under the
2
handle. Remove and rinse the filter
with water.
Pre-Motor filters
Post-Motor filter
N Z : 0 8 0 0 0 0 2 9 9 9
Foam
Felt
18