Page 2
• Do not touch the nozzle or molten adhesive with bare skin as they are hot - the operating ® ® temperature of the Loctite Hysol 050-LITE is approximately 400ºF (200ºC). • Protective gloves should always be worn. Careless handling can cause skin burns. If molten adhesive comes into contact with the skin immerse the affected area immediately in plenty of cold water.
Page 3
Foam materials, like polystyrene, can be easily bonded to other surfaces. However the adhesive must be applied to the other surfaces, not to the foam. • ® ® Use only genuine Loctite Hysol adhesive sticks to ensure reliable performance. ® ® Loctite Hysol adhesive sticks are non-toxic and non-flammable.
Page 4
Accessories and Spare Parts Spare Parts Part Number Standard Nozzle 0.100” (2.5 mm) - supplied with tool 984999 Wire Stand 984914 Manual 984913 Accessories Part Number Extension Nozzle 0.100” (2.5 mm) 985004 Spreader Nozzle 0.250” X 0.080” (6.4 mm X 2 mm) 985001 Pencil-point Nozzle 0.080”...