Control Panel - Panasonic KX-FG2452CX Service Manual

KX-FG2452CX
7.2.

Control Panel

7.2.1. Base Unit
(1) [MIC] (Microphone)
• The built-in microphone.
(2) [GREETING REC]
• To record a greeting message.
(3) [GREETING CHECK]
• To check a greeting message.
(4) [MEMO]
• To record a memo message.
(5) [ERASE]
• To erase messages.
(6) [AUTO ANSWER]
• To turn the auto answer setting ON/OFF.
(7) [PLAYBACK]
• To play messages.
(8) [REDIAL] [PAUSE]
• To redial the last number dialed from the base unit.
• To insert a pause during dialing.
(9) [FLASH]
• To flash time can be changed. (feature #72 or feature #052)
(Refer to Cordless Handset Programming (P.75) and Pro-
gram Mode Table (P.123).)
(10) [CALLER ID]
• To use Caller ID features.
(11) [STOP]
• To stop an operation or programming session.
• To erase a character/number. Press and hold to erase all
characters/numbers.
(12) [LOCATOR] [INTERCOM]
• To make/answer intercom calls.
• To locate the cordless handset.
• To put a call on hold.
(13) [PRINT REPORT]
• To print lists and reports for reference purposes.
(14) [MENU]
• To start or exit programming.
(15) [PHONEBOOK] [VOLUME]
• To adjust volume.
• To search for a stored item.
(16) [SET]
• To store a setting during programming.
(17) [TONE]
• To change from pulse to tone temporarily during dialing
when your line has rotary pulse service. You can also use
tone dial service by changing feature #13 or feature 051.
(Refer to Cordless Handset Programming (P.75) and Pro-
gram Mode Table (P.123).)
(18) [MUTE]
• To mute your voice during a conversation. Press again to
resume the conversation.
(19) [SP-PHONE]
• For speakerphone operation.
(20) [FAX START]
• To send or receive a fax.
(21) [COPY]
• To copy a document.
66