Table of Contents
Advertisement
Using the
U L T R A P E N ( U P - 8 0 3 E )
Hold the UltraPen as you would a pencil. Make sure the side switch is in a convenient location
where you can press it with your thumb or forefinger, but won't accidentally press it while drawing.
Second side switch
Side switch
Tip switch
Pen Tip
When the pen tip is within proximity (5 mm or 0.2 in) of the active area, the tablet reports:
The x, y coordinates of the pen tip.
The pressure applied to the pen tip.
Whether a side switch is ON or OFF.
When pressure is applied to the pen tip, the tip switch is turned ON and the pen simulates a
mouse button click. The tip click pressure can be adjusted in the Wacom control panel. Please
refer to the LCD pen tablet system online Help for details.
Eraser
To use the eraser, hold the UltraPen upside down. When the eraser is within proximity of the
active area, the tablet reports the x, y coordinates and the pressure applied to the eraser.
The eraser can be used as an eraser or assigned to another tool, depending on the application.
The tablet distinguishes the tip switch from the eraser switch. Refer to the LCD pen tablet
system online Help for the UltraPen settings.
Side Switch and Second Side Switch
These switches are programmable, and can be used to perform the same click and double-click
functions as the tip switch. The switches are turned on when pressed, and are otherwise
turned off. Please refer to the online Help for more information on side switch settings.
UltraPenI
Eraser
1 5
Advertisement
Table of Contents
