Wacom PL-500 Installation Manual And User's Manual page 12

The location of the driver will display (e.g., d:\usbtab.inf), click Next to continue.
Note: Please have your Windows 98 CD available. If Windows 98 came bundled with your
computer, the Windows 98 CAB files may be located on your hard disk or on your system
recovery CD.
You may be prompted to insert the Windows 98 CD. Click OK. Enter the location of the
Windows CAB files (e.g., d:\win98). Click OK, and then Finish. Reinsert the Wacom tablet
CD if necessary, then follow the instructions under Windows 98 and 2000: Continue with the
Software Installation.
Windows 2000:
The Wacom tablet will automatically register as a USB device. Double-click on the software
Setup icon located on the Wacom CD and continue with the following instructions.
Windows 98 and 2000: Continue with the Software Installation
Select a language from the Choose Setup Language dialog box and follow the prompts to
complete the installation of the Wacom tablet driver software. You may register your tablet
when prompted. (Electronic registration is only available in some regions.) Adobe Acrobat
Reader V4.0 or greater is required to view the online Help – if Acrobat Reader is already
installed on your system, you may cancel the installation.
Your Wacom tablet software installation is complete. Select Finish to close the Wacom Setup
dialog and the New Hardware Wizard dialogs.
After the driver installation is complete, make sure you can use your UltraPen on the tablet to
move the screen cursor. If the cursor does not move, you should run the Setup program from
the Wacom CD.
You now need to calibrate the tablet so that the screen cursor position lines up with the position
of the UltraPen. (See Calibrating the PL-500 on page 20.) Be sure you have selected the PL-500
as the monitor you wish to calibrate.
A Wacom Tablet group was created in the Start menu under Programs. It contains shortcuts to
the Wacom Tablet Control Panel, online Help, and a Readme file.
12