Lenovo ideacentre All-In-One Y910 Hardware Maintenance Manual page 62

a. Align the new LCD panel with the front cover.
b. Connect the LVDS cables to the connectors on the new LCD panel.
c. Align the holes in the main frame with the ones in the front cover, and then secure the main
frame to front cover with screws.
d. Reattach the side I/O cover.
e. Reattach the camera module.
f. Reattach the speaker system.
g. Reattach the motherboard.
h. Connect the LVDS and speaker system cables to the corresponding connectors on the
motherboard.
Step 23. Reattach the EMI cover, system fan, power switch board, rear I/O module, stand holder, middle
cover, optical drive, hard disk drive, graphic card, rear covers and stand base.
56
ideacentre All-In-One Y910 Computer Hardware Maintenance Manual