Installation; Product Features - Security Camera King TVIOD-PR2EXIR User Manuals

1 Introduction

1.1 Product Features

The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
High performance CMOS sensor

Low illumination, 0.005 Lux @ (F2.0, AGC ON), 0 Lux

with IR
IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

Internal synchronization

SMART IR mode

PoC (with -E)

3-axis adjustment

1.2 Overview
This manual applies to two types of turret cameras.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
Enclosure
Main Body
Mounting Base
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Power Cord
12 VDC
Figure 1-2 Overview of Type II Camera

2 Installation

Before you start:
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your required output to avoid damage.
Make sure the wall is strong enough to withstand

three times the weight of the camera and the
mounting.
Trim Ring
Video Cable
Power Cord
12 VDC
Video Cable
Clip Plate
Mounting Base
Enclosure
Camera