HP mt20 Maintenance And Service Manual page 75

15. If it is necessary to remove or replace the display hinges, remove the 6 Phillips PM2.5×2.5 screws (1)
that secure both display hinges to the display enclosure.
16. Remove the display hinges from the display enclosure (2).
Display hinges are available in the Display Hinge Kit using spare part number 905698-001.
17. If it is necessary to replace the display/webcam cable, remove the webcam cable from the clips in the
display enclosure (1), and the clips at the bottom of the display enclosure (2).
18. Remove the cable from the display enclosure (3).
The display/webcam cable is available using spare part number 905696-001.
The display enclosure is available using spare part number 905694-001.
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures 65