HP mt20 Maintenance And Service Manual page 43

2. Insert a tool into the access hole in the bottom of the computer and push to disengage the keyboard
from the top cover (2).
3. Lift the top of the keyboard upward (1), and then rotate the keyboard until it rests on the palm rest (2).
NOTE: A cable (or cables) connect the bottom of the keyboard to the system board. Make sure not to
prematurely pull the cables out of the system board connector.
4. Disconnect the keyboard cable by lifting the connector latch (1), and then disconnect the keyboard cable
from the system board (2).
Component replacement procedures 33