4.0
Getting Started with UC-Surface
4.1
Anatomy of the UC-Surface Screen
4.1.1 Connected device tabs.
4.1.2
Settings button.
These tabs switch between different mixers available for control on the
network. Selecting a tab will open the associated mixer control.
Selecting this button will open the mixer settings screen. This is where you can
configure global mixer settings such as sampling rate, permissions, wireless network
settings, and more.
1
2
3
1.
Device Settings Tab. General settings options for the selected mixer.
Aux. Routing Tab. Provides routing options for the
2.
additional digital outputs (FireWire and Network)
3.
Backup Tab. Allows you to create and restore a backup of all scenes
and presets on the mixer. Note that Backup does NOT save the
current state of the mixer, only saved scenes and presets.
4.
Smaart Wizards Tab. Integrated Smaart Wizards for room
tuning, setting up delays, and checking outputs.
5.
Networking Tab. Contains options for setting up IP
Address modes and configuring Cascading.
4
5
StudioLive
RML-Series
™
Owner's Manual
12