Installation Requirements; Tools And Parts; Location Requirements - Whirlpool 3RLEC8600 Installation Instructions Manual

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed
level
■
200 to 250 mm (8" or 10")
■
adjustable wrench that opens
to 25 mm (1")
flat blade screwdriver
■
nut driver or socket
■
wrench — 6 mm (1/4")
Parts supplied
Remove parts bag from dryer drum. Check that all parts were
included.
4 leveling legs
Parts needed
Check local codes, and read electrical and venting requirements
before purchasing parts.

INSTALLATION REQUIREMENTS

sealing gun
■
and compound
knife
■
duct tape
■
tin snips
■
hex-head socket
■
wrench — 25 mm (1")

Location Requirements

Observe all governing codes and ordinances.
You will need
A location that allows for proper exhaust installation. The
■
dryer must be exhausted to the outdoors. See "Venting
Requirements."
A sturdy floor to support the dryer and a total weight (dryer
■
and load) of 79.4 kg (175 lb). The combined weight of a
companion appliance should also be considered.
3