MG7550 Cable Modem User Manual
5.4.8 Scan/Bridging
Choose Wireless > Scan/Bridging to display the following page.
Figure 34 Scan/Bridging configuration
This page allows you to configure wireless bridging, which is also known as Wireless
Distribution System (WDS). Bridging allows you connect multiple wireless access
points together to form a single network using wireless point-to-point links.
Wireless Bridging:
This setting enables or disables wireless bridging.
Remote Bridges:
Table of remote bridge MAC addresses authorized to establish a wireless bridge.
Up to 4 remote bridges may be connected. Typically, you will also have to enter your
AP's MAC address (see section 0) on the remote bridge, too.
5.5
Protection & Parental Control
Choose Protection & Parental Control and the submenus of Protection & Parental
Control are shown as below.
47