Backup/Restore - Motorola MG7550 User Manual

The CM/RG supports a dynamic DNS client compatible with the Dynamic DNS
service (http://www.dyndns.com/).
To activate the DDNS client:
1. Go to the Dynamic DNS website and create an account for the Dynamic DNS
service. You will create a username and password, and be asked to choose a
host name for your server, and the dynamic DNS domain to which your host will be
assigned. You will also be asked for your host's current IP address. This is the
WAN IP address that has been assigned to your CM/RG during provisioning. (See
WAN IP Address on the Basic Router/ Setup web page.)
2. Enter your account information on the Basic Router/ DDNS web page, enable
the service by selecting www.DynDNS.org from the DDNS Service drop-down list,
and click Save.
3. The DDNS client will notify the DDNS service whenever the WAN IP address
changes so that your chosen host name will be resolved properly by inquiring hosts.
The current status of the service is shown at the bottom of the DDNS web page.

5.2.6 Backup/Restore

Choose Basic Router > Backup/Restore and the following page appears.
In this page, you can save the current CM/RG configuration settings to a local PC.
You can then later restore these settings if you need restore a particular
MG7550 Cable Modem User Manual
Figure 16 Backup/Restore setup
22