Memory Options - HP ProLiant XL730f Gen9 User And Maintenance Manual

Remove the I/O slot card from the I/O bracket.
7.
To replace the component, reverse the removal procedure.

Memory options

The memory subsystem in this server can support only regular RDIMMs.The server processor determines
the DIMMs supported:
•
Intel Xeon E5-2600 v3 processors support:
HPE 8 GB (1x8 GB) Single Rank x4 DDR4-2133
o
HPE 16 GB (1x16 GB) Dual Rank x4 DDR4-2133
o
•
Intel Xeon E5-2600 v4 processors support:
HPE 8 GB (1x8 GB) Single Rank x8 DDR4-2400
o
HPE 16 GB (1x16 GB) Single Rank x4 DDR4-2400
o
HPE 32 GB (1x32 GB) Dual Rank x4 DDR4-2400
o
The server supports the following DIMM speeds:
•
Single- and dual-rank PC4-2133 (DDR4-2133) RDIMMs operating at up to 2133 MT/s (with Intel
Xeon E5-2600 v3 processors)
•
Single- and dual-rank PC4-2133 (DDR4-2133) RDIMMs operating at up to 2400 MT/s (with Intel
Xeon E5-2600 v4 processors)
Speed and capacity
DIMM rank
Single
Single
Dual
Dual
Dual
Depending on the processor model, and the number of DIMMs installed, the memory clock speed can be
reduced to 1600 MT/s.
Populated DIMM speed (MT/s)
DIMM capacity (GB)
8
8
16
16
32
Native speed (MT/s)
2133
2400
2133
2400
2400
Removal and replacement procedures 45