Utilities And Features; Hpe Smart Storage Administrator; Automatic Server Recovery; Usb Support - HP ProLiant XL730f Gen9 User And Maintenance Manual

The serial number should only be modified by qualified service personnel.
This value should always match the serial number located on the chassis.
To clear the warning, press the Enter key.
4.
Enter the serial number and press the Enter key.
5.
Select Product ID.
6.
The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
Enter the product ID and press the Enter key.
7.
To confirm exiting System Utilities, press the F10 key.
8.
The server automatically reboots.

Utilities and features

HPE Smart Storage Administrator

The HPE SSA is a configuration and management tool for HPE Smart Array controllers. Starting with HPE
ProLiant Gen8 servers, HPE SSA replaces ACU with an enhanced GUI and additional configuration
features.
The HPE SSA exists in three interface formats: the HPE SSA GUI, the HPE SSA CLI, and HPE SSA
Scripting. Although all formats provide support for configuration tasks, some of the advanced tasks are
available in only one format.
Some HPE SSA features include the following:
•
Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
•
Provides diagnostic and SmartSSD Wear Gauge functionality on the Diagnostics tab
•
For supported controllers, provides access to additional features.
For more information about HPE SSA, see the Hewlett Packard Enterprise website
(http://www.hpe.com/servers/ssa).

Automatic Server Recovery

ASR is a feature that causes the system to restart when a catastrophic operating system error occurs,
such as a blue screen, ABEND, or panic. A system fail-safe timer, the ASR timer, starts when the System
Management driver, also known as the Health Driver, is loaded. When the operating system is functioning
properly, the system periodically resets the timer. However, when the operating system fails, the timer
expires and restarts the server.
ASR increases server availability by restarting the server within a specified time after a system hang. You
can disable ASR from the System Management Homepage or through UEFI System Utilities.

USB support

Hewlett Packard Enterprise provides both standard USB 2.0 support and legacy USB 2.0 support.
Standard support is provided by the OS through the appropriate USB device drivers. Before the OS loads,
Hewlett Packard Enterprise supports USB devices through legacy USB support, which is enabled by
default in the system ROM.
Software and configuration utilities 26