Power Supply - HP ProLiant XL730f Gen9 User And Maintenance Manual

Open the server blank locking lever.
1.
Remove the server blank.
2.
To replace the component, reverse the removal procedure.

Power supply

CAUTION: Replace all cut cable ties during a removal and replacement procedure. Failure to
do so results in improper airflow that can lead to thermal damage.
To remove the component:
Power down the server (on page 10).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 11).
3.
Remove the access panel (on page 12).
4.
Removal and replacement procedures 39