Tidying Up the Connected Cables (U32H850UM*)
Stand assembly is complete.
Open the COVER-STAND NECK LEFT,
and rotate the open part at the
Rotate the machine to the highest
Place the corresponding cables into
the stand-neck holder. Do not stretch
the line. Three cables in one holder is
Connect the corresponding cables.
Cover the COVER-STAND NECK LEFT.
Arrange the cables against the bend
tendency of the cables and pull the
cables out of the COVER-REAR SUB
Rotate the machine to the horizontal
Cover the COVER-REAR SUB.
When you attach the COVER-REAR
SUB, please aim six ribs of the COVER-
REAR SUB to the bottom holes of the
COVER-REAR at first.
Arrange the external cables.