Download  Print this page

Connecting The Power (u28h750uq*); Connecting The Power (u32h850um*) - Samsung U*H75 SERIES User Manual

Hide thumbs


― To detect and start a USB device faster, connect the device to the USB 3.0 port on the product. The read/
write rate will be affected by the USB device and your PC.
― The product does not support media play. If you need to play a file in your USB device, please connect the
product as a Hub to your PC and play the file on your PC.
― For USB-related problems caused by OS, drive programs or software, please contact relevant suppliers.
― With the launch of various USB devices on the market, we cannot guarantee that our products are matched
with all USB devices.
― For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source.
― The super charging can only be provided through ports
battery charging specification, USB1 and USB2 can support a maximum current of 1.5A. The actual current
value depends on the device to be charged.
If the current is too high or an exception occurs, the over-current protection will be triggered. This is a
normal setting of the product.
― USB devices requiring high current may not be supported.
current of 1.5A, and
can support a maximum current of 1.0A.
― The battery can be charged in the power-saving mode, but it cannot be charged when the product is
powered off.
― Charging your USB device is not possible if the power cable is disconnected from the power socket.
― The USB device needs to be purchased separately.
. According to the USB 3.0
can support a maximum

Connecting the Power (U28H750UQ*)

Connect the power plug to the AC/DC adapter.
Connect the AC/DC adapter cable to the DC 19V port on the back of the monitor.
Plug the AC/DC adapter into the power outlet.
Press the JOG button on the back of the monitor to turn it on.
― The input voltage is switched automatically.

Connecting the Power (U32H850UM*)

To use the product, connect the power cable to a power outlet and the POWER IN port on the product.
― The input voltage is switched automatically.


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: