Download  Print this page

Pc/av Mode; Displayport Ver; Source Detection; Key Repeat Time - Samsung U*H75 SERIES User Manual

Hide thumbs

Advertisement

PC/AV Mode

Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
Set to
PC
when connected to a PC.
Set to
AV
when connected to an AV device.
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor (when set to HDMI1, HDMI2, DisplayPort(U28H750UQ*) or HDMI1, HDMI2, DisplayPort,
MiniDP(U32H850UM*)) is in power saving mode or is displaying the message
icon to display the On Screen Display (OSD). You can select

DisplayPort Ver.

Select your Displayport.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the monitor (when set to HDMI1, HDMI2, DisplayPort(U28H750UQ*) or HDMI1, HDMI2, DisplayPort,
MiniDP(U32H850UM*)) is in power saving mode or is displaying the message
icon to display the On Screen Display (OSD). You can select
― If you select 1.1, the maximum resolution of your screen drops to 2560 x 1440 due to the limitations in HBR1
transmission speeds.

Source Detection

Select either
Auto
or
Manual
as the method to recognize input signal.
― Not available when
PIP/PBP Mode
is set to On.
Check Signal
Cable, press the
PC
or AV.
Check Signal
Cable, press the
1.1
or 1.2↑.

Key Repeat Time

Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
when a button is pressed.

Power LED On

Configure the settings to enable or disable the power LED located at the lower part of the product.
Working: The power LED is on when the product is turned on.
Stand-by: The power LED is on when the product is turned off.

Reset All

Return all the settings for the product to the default factory settings.
No Repeat
is selected, a command responds only once
46

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: