Miele G 6993 Operating Instructions Manual page 23

Water hardness
The display will change to the screen
for setting the water hardness.
– The dishwasher must be
programmed to the correct water
hardness for your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °d - German scale) always
programme the dishwasher to the
higher value (2.7 mmol/l or 15 °d in
this example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
____________mmol/l or °d
The dishwasher is programmed at the
factory for a water hardness level of 2.7
mmol/l (15 °d - German scale).
 Use the  arrows to select the
hardness you want and confirm with
.
OK
See "Settings menu, Water hardness"
for more information.
Before using for the first time
Finally, prompts will appear in the
display.
After confirming these with
 and  indicators will light up.
 Add salt and rinse aid if necessary
(see "Before using for the first time",
"Dishwasher salt" and "Rinse aid").
 Confirm the messages with
The display will change to show the
main menu.
OK , both the
OK .
23