Miele G 6993 Operating Instructions Manual page 14

Warning and Safety instructions

This dishwasher is supplied with a special lamp to cope with
particular conditions (e.g. temperature, moisture, chemical
resistance, abrasion resistance and vibration). This special lamp
must only be used for the purpose it is intended for. It is not suitable
for room lighting. Replacement lamps may only be fitted by a Miele
authorised person or your Miele dealer.
Correct installation

The dishwasher must be installed and connected in compliance
with the installation sheet supplied.

Take care, both before and during installation of the
dishwasher, not to cut yourself on the metal parts. Danger of
injury. Wear protective gloves.

The dishwasher must be correctly aligned to ensure problem-free
operation.

In order to ensure stability, built-under and integrated dishwashers
must only be installed under a continuous worktop which is secured
to adjacent cabinetry.

If you want to convert your freestanding dishwasher to a built-
under ("U") model, you will need to order the appropriate conversion
kit. If you remove the existing plinth, you must replace it with a U-
model plinth. This is necessary to avoid the risk of injury caused by
protruding metal parts.

The door springs must be adjusted equally on both sides. They
are correctly adjusted when the door remains stationary when left
half open (approx. 45° opening angle). It is also important that the
door cannot fall open.
The appliance may only be used with correctly adjusted door
springs.
14