Starting The Programme; Time Display - Miele G 6993 Operating Instructions Manual

Operation

Starting the programme

 Start the programme by closing the
door.
The TimeControl indicator will light up
to let you know the programme has
started.
If you open the door the message
Crockery can be added
display.
As long as this message is showing,
crockery can be added without
compromising wash results.

Water in the dishwasher may be
hot. Danger of scalding from water in
the cabinet.
Make sure you open the door very
carefully.
A programme should only be
cancelled in the first few minutes, if
at all. Otherwise important
programme stages could be omitted.
46
will show in the

Time display

The estimated duration of the
programme selected appears the
display before the programme begins.
During the programme, the time left
until the end of the programme is
displayed.
Symbols appear to indicate which stage
the programme is at:
 Pre-wash / Soak

Main wash

Interim rinse

Final rinse

Drying

Finish
The programme duration displayed may
vary with the same programme. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process, the water
softening unit, the type of detergent, the
amount of crockery and how dirty it is.
When a programme is selected for the
first time, the display will show the
average programme duration for a cold
water intake.
The durations shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit calculates the
programme duration required according
to the temperature of the water taken
into the dishwasher and the amount of
crockery.