Skoda RAPID Owner's Manual page 74

WARNING
If the engine power and engine braking effect is insufficient to maintain
the set speed, vehicle operation must be taken over!
Operating description

Read and observe on page 71 first.
Overview of the CCS controls » fig. 67
CCS deactivation (delete set speed)
A

Stop control (sprung position)

Activate CCS (control deactivated)

Take control again
B

Start control / reduce speed
C

a) If no speed has been set, the current speed is adopted.
After starting the control, the GRA regulates the vehicle to the current speed
and the warning light illuminates in the instrument cluster.

After interrupting the control, the stored speed can be resumed by pressing
the button.
B
Automatic control interruption
Automatic control interruption occurs if any of the following conditions are
met.
▶
By pressing the brake or clutch pedal.
▶
When one of the brake assist systems (e.g. ESC) intervenes.
▶
If an airbag is deployed.
72
Driving
Fig. 67
Cruise control system controls
/ Increase speed
a)
WARNING
Always deactivate the cruise control system after use to prevent uninten-
■
tional switching on of the system.
Control may only be resumed if the set speed is not too high for the cur-
■
rent traffic conditions.
Notice
During control, speed can be increased by pressing the accelerator pedal. Re-
leasing the accelerator pedal will cause the speed to drop again to the set
speed.