Wireless Connection (Gh680F/Gh688F Only); Camera Network Settings - BenQ GH680 User Manual

Wireless connection (GH680F/GH688F only)

Camera network settings

To configure your camera network settings:
1. On your camera, switch the power lever by the mode dial to
camera is displayed as below.
2. Pressed , you shall see listed items including
,
Network MAC Address
Cloud).
3. Use 4-way control and press
Wi-Fi ID
is used for recognition when using smartphones to directly connect to the camera.
Wi-Fi ID
To set
Wi-Fi ID:
1. Use 4-way control and press
2. The SSID of the camera is displayed, and the SSID password can be changed at this time by
pressing .
3. A virtual keyboard will appear. Use 4-way control and press
character at a time.
4. Select when password changing completed or press
DONE
• Default SSID of the camera is "BenQ_Model Name_MAC address" with default password "12345678".
• The MAC Address is six pairs of hexadecimal digits separated by colons in transmission order (e.g.
01:23:45:67:89:AB). The character A ~ F is in capital.
Q Key
is a convenience when a short cut is needed to reach a certain function when switched the
Q Key
power lever to
Wi-Fi
58 Connection to the camera
, and
Logout BenQ Cloud
key to select desired item, or press
to enter
and browsing photos in the camera.
Wi-Fi
,
Wi-Fi ID Q Key, Send Image Resolution
(exposed only when logged onto BenQ
.
Wi-Fi ID
, and the LCD screen of the
to exit.
key to select a desired
to go back to previous menu.
,